教員情報 - 古木　辰也

フルキ　タツヤ FURUKI Tatsuya
古木　辰也

所属

College of Engineering Department of Mechanical Engineering

Graduate School of Engineering Department of Mechanical Engineering

職名 Associate Professor

Book and thesis
Papers	In Situ Evaluation of Drill Wear Using Tool Image Captured on Machining Center International Journal of Automation Technology 18 (2),pp.181-188 (Co-authored) 2024
Papers	Development of surface roughness prediction method based on polished surface image using supervised learning Journal of the Japan Society of Grinding Engineers,pp.30-35 2023/01
Papers	Substrate Surrounding Type Magnetron Sputtering Equipment Comparison of HiPIMS and DCMS Drive IEEJ Transactions on Fundamentals and Materials,pp.101-107 2022/03/01
Papers	Development of Forward-Reverse Rotating cBN Electroplated End-Mill Type Tool for Cutting and Grinding Processing of CFRP International Journal of Automation Technology 15 (1),pp.41-48 2021/01
Papers	Investigation of Optimum Grinding condition using cBN Electroplated End-mill for CFRP Machining International Journal of Automation Technology 15 (1),pp.4-16 2021/01
Papers	Development of the cBN Electroplated End-Mill for High Precision Machining of CFRP Proc. of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing 2020/09/03
Papers	Derivation of optimum abrasive for improving magnetic polishing rate for hybrid metal AM titanium alloy and creating a polishing prediction model International Journal of Abrasive Technology 10 (2),pp.106-121 2020/09
Papers	Estimation of magnetic polishing rate on additive manufactured Ti-6Al-4V Proc. of euspen’s 20th Int. Conf. & Exhibition 2020/06
Papers	Investigation of Optimum Grinding condition using cBN Electroplated End-mill for CFRP Machining Proc. of 22nd Int. Symp. On Advances in Abrasive Technology 15 (1),pp.302-307 2019/12
Papers	Influence of magnetic polishing condition on polishing rate of additive manufactured titanium alloy Proc. of 8th Int. Conf. of Asian Society for Precision Engineering and Nanotechnology,pp.No. A04 2019/11
Papers	Investigation on Magnetic Polishing Characteristics of Metal Additive Manufactured Ti-6Al-4V Internation Journal of Abrasive Technology 9 (3),pp.188-199 2019/10
Papers	Investigation on optimum abrasive size of cBN electroplated end-mill for CFRP machining Proc. of euspen 19th Int. Conf. & Exhibit. Proc. of euspen 19th Int. Conf. & Exhibit.,pp.388-391 2019/06
Papers	Mirror-Surface Finishing by Integrating Magnetic-Polishing Technology with a Compact Machine Tool International Journal of Automation Technology 13 (2),pp.207-220 2019
Papers	Thermal history analysis during sintering process of maragingsteel in powder bed fusion Proceedings of JSPE Semestrial Meeting,pp.181-181 2019
Papers	Effect of humidity on the friction properties of a-C:H and a-C:H:Si films deposited by PECVD employing microwave sheath-voltage combination plasma Japanese Journal of of Applied Physics 58,pp.SAAC06-1-SAAC06-8 2018/12
Papers	Development of Non-Contact Type On-Machine Shape Measuring Method for Rotating Tool Proc. of 21th Int. Symp. On Advances in Abrasive Technology,pp.Chapters06-61 2018/10
Papers	Influence of Angel Between Fibre and Machining Direction for CFRP Machining Using cBN Electroplated End-mill Proc. of 21th Int. Symp. On Advances in Abrasive Technology,pp.Chapters04-51 2018/10
Papers	Investigation on Magnetic Polishing Characteristics of Additive Manufactured Ti-6Al-4V Proc. of 21th Int. Symp. On Advances in Abrasive Technology,pp.Chapters09-95 2018/10
Papers	Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP International Journal of Abrasive Technology 8 (3),pp.188-202 2018/08
Papers	Investigation of magnetic polishing characteristics of additive manufactured Ti-alloy Proc. of euspen 18th Int. Conf. & Exhibit.,pp.345-346 2018/06
Papers	High precision grinding for Fresnel shape mold made of binder-less tungsten carbide J. of the Japan Society for Abrasive Technology,pp.10-13 2018/06
Papers	DLC膜欠損部の修復のための再堆積技術の開発および修復効果の評価材料試験技術,pp.28-33 2018/01
Papers	The Property of the CFRP Machined Surface by Switching Rotational Direction Using cBN Electroplated End-mill The Proceedings of Mechanical Engineering Congress, Japan,pp.S1320205 2018
Papers	Investigation on grinding characteristics of metal additive manufactured maraging steel The Proceedings of Mechanical Engineering Congress, Japan,pp.S1320105 2018
Papers	Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP Proc. of 20th Int. Symp. On Advances in Abrasive Technology 8 (3),pp.347-354 2017/12
Papers	Fundamental study of magnetic polishing for Ti-alloy by use of machining center Proc. of euspen 17th Int. Conf. & Exhibit.,pp.263-264 2017/06
Papers	Prosecc monitoring of round tools with a wireless communication holder system and infrared thermography Journal of the Japan Society for Abrasive Technology,pp.34-39 2017/01
Papers	CONTROL OF PRESSING FORCE IN MAGNETIC ABRASIVE FINISHING USING PERMANENT MAGNET END-MILL TOOL PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1 2017
Papers	Magnetic Polishing of Ti-alloy with Machining Center Proceedings of JSPE Semestrial Meeting,pp.817-818 2017
Papers	Magnetic Polishing of Stainless Steel with Machining Center Proc. of 12th China-Japan Int. Conf. on Ultra-Precision Machining Process,pp.85-90 2016/11
Papers	Elucidation of the polishing mechanism by the magnetic polishing brush Transactions of the JSME,pp.1-12 2016/11
Papers	Development of magnetic polishing method with 5-axis machining center for aspherical shape Proc. of euspen 16th Int. Conf. & Exhibit.,pp.No. P6.10 2016/06
Papers	409 Diagnostics of End-mill Process with an Infrared Imagery with Thermography and a Wireless Multifunctional Tool Holder System,pp.117-120 2016/03/11
Papers	616 Study on Screw Cutting Performance by Three Axis Controlling Helical Interpolate Motion,pp.216-219 2016/03/11
Papers	Multipoint simultaneous monitoring of end-mill processing temperature with wireless telegraphic multifunctional tool holder Journal of the Japan Society for Abrasive Technology,pp.146-152 2016/03
Papers	Influence of cBN electroplated end-mill shape on CFRP machining Proceedings of JSPE Semestrial Meeting,pp.685-686 2016
Papers	Development of cBN electroplated end-mill for CFRP processing Proceedings of JSPE Semestrial Meeting,pp.365-366 2016
Papers	ELUCIDATION OF POLISHING MECHANISM USED IN MAGNETIC POLISHING BRUSH 2016 INTERNATIONAL SYMPOSIUM ON FLEXIBLE AUTOMATION (ISFA),pp.31-37 2016
Papers	Estimation of unsteady and steady polishing force in magnetic abrasive finishing using a permanent magnet end-mill tool Materials Science Forum 874,pp.178-183 2016
Papers	Investigation of cBN electroplated end-mill shape for CFRP machining Materials Science Forum 874,pp.463-468 2016
Papers	Investigation of cBN electroplated end-mill shape for CFRP machining Materials Science Forum 874,pp.463-468 2016
Papers	Monitoring method of process temperature and vibration of rotating machining tool with a wireless communication holder system Materials Science Forum 874,pp.519-524 2016
Papers	Magnetic polishing of micro channel using a ball-nose end-mill type tool with a compact machine tool Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 2015/10/18
Papers	Development of Polishing Tool Capable of Self-Adaptive to Processing Site using Steel Balls and Magnetic Force Proc. of 18th Int. Symp. on Advances in Abrasive Technology,pp.No. K-086 2015/10
Papers	End-milling of CFRP/Ti-6Al-4V with Electroplated cBN Tool Proc. of 18th Int. Symp. on Advances in Abrasive Technology,pp.No. J-019 2015/10
Papers	Investigation of control methods of chatter vibration based on analysis of end-milling chatter mark Proc. of 18th Int. Symp. on Advances in Abrasive Technology,pp.No. P-02 2015/10
Papers	Investigation of End-milling Process Based on Monitoring Method with Wireless Telegraphic Multifunctional Tool Holder and Infrared Thermography Proc. of 18th Int. Symp. on Advances in Abrasive Technology,pp.No. J-003 2015/10
Papers	Development of Polishing Tool Capable of Self-Adaptive to Processing Site using Steel Balls and Magnetic Force Advanced Materials Research 1136,pp.466-471 2015/07
Papers	End-milling of CFRP/Ti-6Al-4V with Electroplated cBN tool Advanced Materials Research 1136,pp.202-208 2015/07
Papers	Investigation of control methods of chatter vibration based on analysis of end-milling chatter mark Advanced Materials Research 1136,pp.639-644 2015/07
Papers	Investigation of End-milling Process Based on Monitoring Method with Wireless Telegraphic Multifunctional Tool Holder and Infrared Thermography Advanced Materials Research 1136,pp.606-611 2015/07
Papers	Development of magnetic polishing method of aspherical shape using small ball end mill type tool Proc. of euspen 15th Int. Conf. & Exhibit.,pp.33-34 2015/06
Papers	Investigation of tool internal temperature in end-milling process with a wireless holder system Transactions of the JSME,pp.1-12 2015/06
Papers	マシニングセンタを用いた「魔鏡」製作の新たな試み砥粒加工学会誌,pp.175-178 2015/04
Papers	603 Monitoring of End-mill Process with a Wireless Multifunctional Tool Holder System,pp.210-213 2015/03/16
Papers	P092 Examination of Finishing Method of Micro Channel using the End mill type Magnetic Polishing Tool,pp.510-510 2015/03/16
Papers	Consideration of machining temperature during high speed cutting of CFRP with electroplated cBN end-mill Proceedings of JSPE Semestrial Meeting,pp.407-408 2015
Papers	High Speed Milling of CFRP with cBN Electroplated End-mill Proceedings of JSPE Semestrial Meeting,pp.1027-1028 2015
Papers	Influence of grit size in high speed milling of CFRP with cBN electroplated end-mill Proceedings of JSPE Semestrial Meeting,pp.405-406 2015
Papers	FABRICATION OF ELECTROPLATED CBN END-MILL FOR HIGH-EFFICIENCY FACE MILLING OF CARBON FIBER REINFORCED PLASTIC PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1,pp.No. MSEC2015-9280 2015
Papers	Satiny and continuous-curvature corrugated surface generation by integrating end-milling processes and magnetic polishing with a machining center Key Engineering Materials 625,pp.247-252 2015
Papers	Satiny and continuous-curvature corrugated surface generation by integrating end-milling processes and magnetic polishing with a machining center Key Engineering Materials 625,pp.247-252 2015
Papers	Fabrication of magic-mirror with magnetic polishing and end-milling on machining center Transactions of the JSME,pp.1-13 2014/12
Papers	A33 Consideration about the Magnetic Polishing by End Mill shaped Tool at the Bottom of Micro Channel The ... Manufacturing & Machine Tool Conference,pp.49-50 2014/11/14
Papers	Smooth Micro-unevenness Surface Generation of Difficult Difficult-to -Cut Material by Small Diameter End milling and Magnetic Polishing Polishing Proc. of 15th Int. Conf. on Precision Engineering,pp.593-598 2014/07
Papers	405 Elucidation of End-Mill Process Based on Infrared Image Diagnostic,pp."4-5" 2014/03/18
Papers	406 Study on the path of polishing on machining center by end-mill type of magnetic abrasive tool,pp."4-6" 2014/03/18
Papers	Influence of tool shape and coating type on machined surface quality in face milling of CFRP Advanced Materials Research 1017,pp.310-315 2014
Papers	Monitoring of end-mill temperature with infrared thermography and wireless tool holder system Advanced Materials Research 1017,pp.624-629 2014
Papers	Analysis of chatter vibration based on the monitoring of end-mill surface pattern Proceedings of JSPE Semestrial Meeting,pp.715-716 2014
Papers	High Speed Face Milling of CFRP with Various End-mill Type Tools Proceedings of JSPE Semestrial Meeting,pp.207-208 2014
Papers	Fabrication Method of Smooth Micro-unevenness Mirror Surface of Difficult-to-Cut Material with a Machining Center Proceedings of JSPE Semestrial Meeting,pp.703-704 2014
Papers	Fabrication of magic-mirror surface by in-situ magnetic polishing method with a machining center,pp.77-82 2013
Papers	911 Development of PCD milling tool made by EDM and ultraprecision cutting of tungsten carbide Materials and processing conference,pp."911-1"-"911-2" 2012/11/30
Papers	C36 Ultra Precision Cutting of Tungsten Carbide Mold with PCD Milling Tool The ... Manufacturing & Machine Tool Conference,pp.185-186 2012/10/27
Papers	Precision grinding and polishing of large aspheric glass lenses for digital single lens reflex cameras Proc. of euspen 12th Int. Conf. & Exhibit.,pp.250-253 2012/06
Papers	Precision Grinding of Large Aspherical Glass Lenses for Digital Single Lens Reflex Camera Proc. of 11th Annual Conf. of American Society for Precision Engineering,pp.449-452 2012/06
Papers	Ultra Precision Cutting of Tungsten Carbide Mold with PCD Milling Tool Fabricated by EDM and Grinding Proc. of 11th Annual Conf. of American Society for Precision Engineering,pp.426-429 2012/06
Papers	High Precision Grinding of Large Fresnel Lens Mold PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011) 516,pp.629-+ 2012
Papers	High Precision Grinding of Large Fresnel Lens Mold PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011) 516,pp.629-+ 2012
Papers	Precision grinding of structured tungsten carbide mold ULTRA-PRECISION MACHINING TECHNOLOGIES 497,pp.15-+ 2012
Papers	Ultraprecision cutting of tungsten carbide mold by micro milling tool:- Micro fabrication of micro milling SCD tool and trial of ultraprecision cutting of tungsten carbide - Proceedings of JSPE Semestrial Meeting,pp.821-822 2012
Papers	Precision cutting of structured ceramic molds with micro PCD milling tool International Journal of Automation Technology 5 (3),pp.277-282 2011