Book and thesis
Books
“One-Dimensional Phase Transformation Model and Its Application to Damping Enhancement Analysis,” Advances in Shape Memory Materials – In Commemoration of the Retirement of Professor Hisaaki Tobushi, Edited by Q. Sun, R. Matsui, K. Takeda, E. A. Pieczyska Advanced Structured Materials Vol. 73,pp.17-30 2017
Books
Strength of Materials - Fundamentals of Mechanical Design - (in Japanese) (Co-authored) 2014
Books
“The Use of Shape Memory Alloys in Aerospace Engineering,” Shape Memory and Superelastic Alloys: , Edited by K. Yamauchi, I. Ohkata, K. Tsuchiya, S. Miyazaki Applications and Technologies,pp.125-140 (Co-authored) 2011/04
Papers
Demonstration of a Deformable Structure Equipped with a Grating Pattern Printing Measurement System -Flight Experiment in FY2023-,pp.1-21 (Co-authored) 2024/02
Papers
“Constitutive Modeling of Shape Memory Alloy Including Martensite-transformation-induced Plasticity,” Sensors and Materials 32 (8(3)),pp.2825-2839 (Sole-authored) 2020/08/31
Papers
“Proposal of Feedback Control Systems for Thermal Driven High Power Density Actuator,” Journal of Spacecraft and Rockets 57 (1),pp.99-108 (Co-authored) 2020
Papers
“Quantitative Investigations on the Dimensional Stability of a CFRP Reflector Model Against Temperature Variations,” Transactions of the JSASS / Aerospace Technology Japan 62 (5),pp.275-283 (Co-authored) 2019
Papers
“Suppression of Out-of-Plane Thermal Deformation of CFRP Reflectors by Linear Actuators,” Transactions of the JSASS/ Aerospace Technology Japan Vol. 16 (Issue 2),pp.116-122 (Co-authored) 2018
Papers
“Memory Effects Performance of Polyurethane Shape Memory Polymer Composites (SMPC) in the Variation of Fiber Volume Fractions,” Fibers and Polymers Vol. 18 (No. 5),pp.979-986 (Co-authored) 2017
Papers
“Wind Tunnel Test of Morphing Flap Driven by Shape Memory Alloy Wires,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan Vol. 15 APISAT-2016,pp.a75-a82 (Co-authored) 2017
Papers
“Effect of Temperature on Crack Kinking and Jumping in a Cross-Ply Laminated Beam,” Archives of Mechanics Vol. 68 (No. 5),pp.349-369 (Co-authored) 2016
Papers
“Evaluation of Thermal Strain Suppression Design of Piezoelectric Ceramic Actuators,” Transactions of the Japan Society for Aeronautical and Space Sciences/ Aerospace Technology Japan Vol. 14 (No. ists30),pp.Pc_19-Pc-24 (Co-authored) 2016
Papers
“Sensitivity Analysis of Thermal Deformation of CFRP Laminate Reflector due to Fiber Orientation Error,” Journal of Mechanical Science and Technology Vol. 30 (No. 10),pp.4423-4426 (Co-authored) 2016
Papers
“Thermal Deformation Generated on a CFRP Laminated Reflector,” Bulletin of the JSME, Mechanical Engineering Journal, 16-00296 (9pp) Vol. 3 (No. 5) (Co-authored) 2016
Papers
“Analytical Investigation of Strain Loading Frequency Effect on Stress-strain-temperature Relationship of Shape-memory Alloy,” Archives of Mechanics Vol. 67 (issue 4),pp.275-291 (Sole-authored) 2015
Papers
“Shape Retainment by Utilizing Hysteresis in Piezoelectric Ceramics,” Transactions of the Japan Society for Aeronautical and Space Sciences / Aerospace Technology Japan Vol. 12 (No. ists29),pp.Pc_69-Pc-74 (Co-authored) 2014
Papers
“Optimal Fiber Placement of CFRP Dry Preforrn by Using an Embroidery Machine,” Journal of the Japan Society for Composite Materials (in Japanese),pp.10-16 (Co-authored) 2014
Papers
“Micromechanical Model of Shape Memory Polymer Including Temperature-Strain History Dependence,” Transactions of the Japan Society of Mechanical Engineers (in Japanese) smm0310 (17pp).,pp.SMM0310 (Co-authored) 2014
Papers
“Bi-Stable Composite Laminates Induced by Vibration of Piezoelectric Film Actuators,” International Journal of Aerospace and Lightweight Structures (IJALS) Vol. 2 (No. 3),pp.299-315 (Co-authored) 2012
Papers
“Constitutive Model of Ferroelectric Materials for Expressing Temperature Dependent Property,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese),pp.1079-1089 (Co-authored) 2012
Papers
“Deflection and Vibration Control of Laminated Plates Using Extension and Shear Actuated Fiber Composites,” Smart Materials Research, Article ID 515942 (15p). Vol. 2011 (Co-authored) 2011
Papers
“Deformation of a Beam with Partially Debonded Piezoelectric Actuators,” Journal of Intelligent Material Systems and Structures Vol. 21-March,pp.453-468 (Co-authored) 2010
Papers
“Flutter Prediction Using Continuous Wavelet Transform,” Trans. JSASS Vol. 51 (No. 174),pp.275-281 (Co-authored) 2009
Papers
“One-Dimensional Switching Model for Hysteresis in Piezoelectric Materials,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese),pp.41-48 (Co-authored) 2009
Papers
“Constitutive Model of Shape Memory Alloys for Asymmetric Quasiplastic Behavior,” Journal of Intelligent Material Systems and Structures Vol. 19,pp.533-540 (Sole-authored) 2008/05
Papers
“Application of the Preisach Model to Tension-Compression Asymmetric Deformation Behavior of Martensitic Shape Memory Alloys,” Journal of Solid Mechanics and Materials Engineering Vol. 2 (No. 8),pp.1172-1183 (Co-authored) 2008
Papers
“Concept and Electro-elastic Modeling of Shear Actuated Fiber Composite using Micro-mechanics Approach,” Journal of Intelligent Material Systems and Structures Vol. 19-October,pp.1173-1183 (Co-authored) 2008
Papers
“Influence of Uncertainties for Compressive Buckling of Composite Materials and Its Numerical Simulations,” Advanced Composite Materials Vol. 17,pp.177-190 (Co-authored) 2008
Papers
“Active Vibration Control of Smart Plates with Partially Debonded Multilayered PZT Actuators,” Smart Materials and Structures Vol. 16 (No. 5),pp.1584-1594 (Co-authored) 2007
Papers
“Numerical Analysis of Effects of Transglottal Pressure Change on Fundamental Frequency of Phonation,” Annals of Otology, Rhinology & Laryngology Vol. 116 (No. 2),pp.128-134 (Co-authored) 2007
Papers
“Smart Vortex Generator Transformed by Ambient Temperature Change,” Transactions of the Japan Society for Aeronautical and Space Sciences Vol. 50 (No. 168),pp.128-133 (Co-authored) 2007
Papers
“New Technological Development of Passive and Active Vibration Control: Analysis and Test,” Smart Materials and Structures Vol. 14 (No. 2),pp.343-348 (Co-authored) 2005
Papers
“A Unified Constitutive Model of Phase Transformations and Rearrangements of Shape Memory Alloy Wires Subjected to Quasistatic Load,” Smart Materials and Structures Vol. 13 (No. 3),pp.535-543 (Co-authored) 2004
Papers
“Active Tuning of Shape Memory Alloy Pseudoelastic Property,” Smart Materials and Structures Vol. 13 (No. 3),pp.503-511 (Co-authored) 2004
Papers
“Constitutive Model of Shape Memory Alloys for Unidirectional Loading Considering Inner Hysteresis Loops,” Smart Materials and Structures Vol. 13 (No. 4),pp.916-925 (Co-authored) 2004
Papers
“Micromechanical Modeling of Polycrystalline Shape-Memory Alloys Including Thermo-mechanical Coupling,” Smart Materials and Structures Vol. 12 (No. 1),pp.6-17 (Co-authored) 2003
Papers
“Experimental and Analytical Studies on Stress-Strain-Temperature Relationship of TiNi Shape memory Alloy Subjected to Cyclic Loadings,” Transactions of the Japan Society of Mechanical Engineers. A (in Japanese),pp.515-522 (Co-authored) 2003
Papers
“Numerical Analysis of Pathological Voice Production Using Asymmetric Distributed-Parameter Model for Vocal Fold (1st Report, Numerical Analysis of Phonation Threshold Pressure),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese),pp.793-798 (Co-authored) 2002
Papers
“A Numerical Analysis of Phonation Using a Two-Dimensional Flexible Channel Model of the Vocal Folds,” Trans. ASME J. Biomech. Eng. Vol. 123 (No. 6),pp.571-579 (Co-authored) 2001
Papers
“Analytical Study on Training Effect of Pseudoelastic Transformation of Shape Memory Alloys in Cyclic Loading,” J. Intel. Mater. Syst. Struct. Vol. 12 (No. 4),pp.295-300 (Co-authored) 2001
Papers
“Specific Damping Capacity of Multiphase Unidirectional Hybrid Fiber Composites,” J. Intel. Mater. Syst. Struct. Vol. 12 (No. 4),pp.259-264 (Co-authored) 2001
Papers
“Thermo-Mechanical Behavior Associated with Pseudoelastic Transformation of Shape Memory Alloys,” Smart Mater. Struct. Vol. 10 (No. 5),pp.884-892 (Co-authored) 2001
Papers
“Stability Analysis of a Collapsible Tube Conveying Fluid (On Effects of Perturbations Induced by Movement of Separation Point and Length of Downstream Channel),” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese),pp.926-933 (Co-authored) 2001
Papers
“Electromagnetic Forces for a New Vibration Control System: Experimental Verification,” Smart Mater. Struct. Vol. 9 (No. 2),pp.127-131 (Co-authored) 2000
Papers
“A One-Dimensional Unsteady Separable and Reattachable Flow Model for Collapsible Tube-Flow Analysis,” Trans. ASME J. Biomech. Eng. Vol.121 (No.2),pp.153-159 (Co-authored) 1999
Papers
“Experiments on Steady and Oscillatory Flows at Moderate Reynolds Numbers in a Quasi-Two-Dimensional Channel With a Throat,” Trans. ASME J. Biomech. Eng. Vol.120 (No.5),pp.594-601 (Co-authored) 1998
Papers
“Vibration Control System Using Electromagnetic Forces,” J. Intel. Mater. Syst. Struct. Vol. 8,pp.751-756 (Co-authored) 1997
Papers
“A Two-Dimensional Vocal Cord Model for Heavy Voice,” Transactions of the Japan Society of Mechanical Engineers. C (in Japanese),pp.693-699 (Co-authored) 1997
Papers
“An Analysis of Phonation Using a Mechanical Model,” The Larynx Japan (in Japanese),pp.104-109 (Co-authored) 1997
Papers
“A Quantitative Visualization Study of Flow in a Scaled-up Model of a Centrifugal Blood Pump,” Artificial Organs Vol. 20 (No. 2),pp.132-138 (Co-authored) 1996
Papers
“Fluid Dynamics of Turbo Pumps for Artificial Heart,” Mater. Sci. Eng. C Vol. 4,pp.99-106 (Co-authored) 1996
Papers
,“Design of a Centrifugal Blood Pump with Magnetic Suspension,” Artificial Organs Vol. 19 (No. 7),pp.625-630 (Co-authored) 1995
Papers
“Analysis of Flow in a Two-Dimensional Collapsible Channel Using Universal“Tube”Law,” Trans. ASME J. Biomech. Eng. Vol. 116 (No. 4),pp.469-476 (Co-authored) 1994
Papers
“Synthesis of Voiced Sound with a One-Diensional Unsteady Glottal Flow Model,” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese),pp.1226-1233 (Co-authored) 1994
Papers
“Numerical Analysis of a Collapsible Tube Conveying Fluid; Two-Dimensional Channel Model,” Transactions of the Japan Society of Mechanical Engineers. B (in Japanese),pp.486-493 (Co-authored) 1991